Quartz Care Guide

To clean we recommend using warm water and a mild detergent or quality spray and wipe type cleaner in order to enjoy enduring beauty for years to come.

Minimal Maintenance

In most cases, soap and water or a mild detergent is enough to keep your Quartz countertop looking like new. If necessary, use a non-abrasive soft soap along with a non-scratch or delicate scrub pad. Afterwards, thoroughly rinse with clean water to remove residue.

Stubborn Stains or Dried Spills

If needed, apply a non-abrasive household cleaner (a non-abrasive cleaner will not dull the surface shine) and rinse to remove residue. To remove adhered material such as food, gum, nail polish or even dried paint, first scrape away excess material with a plastic putty knife and then use a damp cloth to remove any marks or residual dirt. For extra-stubborn stains, a no-scratch Scotch-Brite® pad or similar is recommended along with a non-abrasive cleaner.

Heat Tolerance

Quarts is heat resistant and is not affected by temperatures lower than 150°C (300°F). However, like all stone material, Quartz can be damaged by sudden and rapid temperature changes. Therefore, we suggest that hot pots and pans never be directly placed on the surface. We also recommend a hot pad or trivet be placed on the surface under cooking units such as electric frying pans, crock pots, or roaster ovens. Also the PH level should be changed from 10 to 8 in the following section

Scratch Resistant

Quarts is a highly scratch resistant surface; however avoid abuse of the surface by refraining from using sharp objects such as sharp knives or screw drivers directly onto the surface.

Cleaning Agents to Avoid

It’s important to be aware that Quartz can be permanently damaged if exposed to strong chemicals and solvents that can damage its physical properties. Never clean your Quartz surface with products that contain Trichlorethane or Methylene chloride, such as paint removers or strippers. Avoid the use of highly aggressive cleaning agents such as oven/grill cleaners and dishwasher polishing agents that have high alkaline/pH levels (pH 8.5 or higher). Products containing oils or powders may leave a residue and should be rinsed off thoroughly. Should your surface accidentally be exposed to any of these damaging products, rinse immediately with clean water to neutralize the effect.